派克DC Motor Speed Controllers - DC590+ Series
DC Motor Speed Controllers - DC590+ Series
先进的DC590 +系列四象限直流驱动器为客户提供可达2700A额定电流的产品,同时可以提供功能模块编程、可定义的I/O端口和通用的应用软件,符合复杂的直流电机控制应用要求。
The Integrator series is a single family of both AC drives (AC690+) and DC drives (DC590+) that provides the benefits of common programming, set-up and communication across both technologies. The DC590+ Integrator series highly advanced DC drive meets the demands of the most complex motor control applications. Extensive application software (including winder control as standard) together with Function Block Programming and configurable I/O creates a total drive system in a single module.
Options :
• Programmable Keypad 6901
• Technology Box for Communications (Profibus-DP, DeviceNet, CANopen, LINK, LonWorks, EI Bisynch/RS422/RS485, Modbus RTU)
• Speed Feedback Technology Box (analogue Tachometer, encoder microtach for acrylic F.O., microtach for glass F.O.)
• EMC Filter- Industrial Ambience
• Line Reactors for European and North American markets (UL-CSA)
• Line Inductors for long motor leads
• 598+ and 599+ Stack Controller configuration available for retrofit of existing power stacks
Markets:
• Converting Machinery
• Plastics and Rubber Processing
• Wire and Cable
• Material Handling Systems
• Automotive
Features and Benefits:
• Common Programming, Set-Up and Communications Platform with AC690+ AC Integrator Series
• Ratings Up to 1200 HP (1950 Amps) and Supply Voltages to 690V, Non-Regenerative and Regenerative Models
• Internal Controlled Field Supply
• Function Block Programming, Including Open and Closed-Loop Winder Control as Standard
• DRV Style Includes Built-IN Contactor, Fuses and Provision for On-Board Control Transformer and Blower Starter
Applications:
• Printing
• Film and Foil Lines
• Extrusion
• Mixers
• Annealing Lines
• Slitting Lines
• Metal Processing
• Test Stands
• Dynanometers
Macro Function Blocks:
• Open-loop winder control
• Winder control - loadcell/dancer
• Section control
• Math functions
• Embedded controller functions
Standards:
The DC590+ Series DC drives listed on this page meet the following standards when installed in accordance with the relevant product manual:
• EMC Compatibility : CE Marked in accordance with 2004/108/EC (EMC Directive)
• Europe : This product conforms with the Low Voltage Directive 2006/95/EC
• Safety : EN61800-5/2003 (when fitted inside a cubicle)
• North America/Canada : *Complies with the requirements of UL508C and CSA22.2 #14 as an open-type drive (*only applicable to frame sizes 1-4)
• Overvoltage Category : Overvoltage Category III (3-phase supply) / Overvoltage Category II (auxiliary supply)
• Pollution Degree : II (non-conductive pollution, except for temporary condensation) for control electronics
Technical Specifications:
Power Supply:
Three Phase
110-220VAC ± 10 %, 50-60 Hz ± 5%
220-500VAC ± 10 %, 50-60 Hz ± 5%
500-690VAC ± 10 %, 50-60 Hz ± 5%
Output Armature Current Ratings:
15 - 2700A (15 - 165A for DRV Versions)
Overload:
- for 15 to 270A drives : 150% for 30 sec / 200% for 10 sec
- for drives above 270A : refer to catalog or manual for details
Environment:
- for 15 to 165A drives : 0-45°C / 32-113°F
- for 180 to 270A drives : 0-35°C / 32-95°F
- for 380 to 2700A drives : 0-40°C / 32-104°F
Up to 500m ASL (derate 1% per 200m up to 5000m maximum)
Protection:
IP00 / IP20 on frame size 1 (15-35A) drives only [Europe]
UL Open Type [North America/Canada]
Speed Feedback:
- Armature Voltage Feedback / - Tach Generator / - Encoder / - Optical Fiber Microtach encoder
Analog Inputs:
5 Total : 1 x 12 bit (plus sign), 4 x 10 bit (plus sign)
- 1x Speed Demand Setpoint (-10/0/+10V) / 4x Configurable
Analog Outputs:
3 Total : 10 bit
- 1x Armature Current Output (-10/0/+10V or 0-10V) / 2x Configurable
Digital Inputs:
9 Total : 24VDC (max 15mA)
- 1x Program Stop / 1x Coast Stop / 1x External Stop / 1x Start-Run / 5x Configurable
Digital Outputs:
3 Total : 24VDC / 100mA (short circuit protected)
- 3x Configurable
Reference Supplies:
- 1x- +10VDC / 1x -10VDC / 1x +24VDC
Power Bridge:
590+ - 4 Quadrant Regenerative : Dual Three Phase SCR bridges
591+ - 2 Quadrant Non-Regenerative : Single SCR bridge
Variable Field Control with SCR's
Drive Protection:
- High energy MOV's / - Heatsink overtemperature / - Instantaneous overcurrent
- Thyristor trigger failure / - Inverse time overcurrent / - Interline snubber network
- Field Failure / - Zero speed detection / - Speed feedback failure / - Stall protection
- Motor overtemperature / - Stall protection
Tech Specifications
PERFORMANCE CHARACTERISTICS
BRANDParker
PRODUCT TYPEDC Drive
DRIVE AXIS TYPESingle Axis Technology
PRODUCT SERIESDC590
INPUT VOLTAGE3*230VAC
3*380-480VAC
3*500-690VAC
CONTINUOUS OUTPUT CURRENT RATING15 - 1950A
OUTPUT POWER1 - 1200 HP
COMPATIBLE MOTOR TYPEDC Brushed Servo
COMPATIBLE FEEDBACK DEVICEArmature Voltage
Tachometer
Encoder
MODES OF CONTROLRegenerative
Non-Regenerative
Stack Controller
COMMUNICATION INTERFACERS232 / RS485
CANopen
ControlNet
DeviceNet
Profibus
Ethernet TCP/IP
Link Communications
Modbus
OPERATING TEMPERATURE0 - 45C (15-165A) / derate up to 55C max
0 - 35C (180-270A) / derate up to 55C max
0 - 40C (380-1950A) / derate up to 55C max °C
32 - 113F (15-165A) / derate up to 131F max
32 - 95F (180-270A / derate up to 131F max
32 - 104F (380-1950A) / derate up to 131F max °F
OPERATING ALTITUDEUp to 500m ASL (derate > 500m)
OVERLOAD RATING150% for 30s
200% for 10s
(depending on drive output current, refer to manual for details)
SPECIFICATIONS METCE (EMC & LVD)
Overvoltage Category III
Pollution Degree II
UL Listed
cUL Listed